SERIES 30
Decorative LED bulkhead
Description
- Emergency
- Easy to install
- High-pressure die-cast aluminium base
- High-impact
The SERIES 30 range is available in a 1-hour Emergency version.
Four fixing holes to hold the trim ring casting to the base casting by stainless steel M5 Allen head screws, located outside the optical compartment.
Base casting manufactured from marine grade high-pressure die-cast aluminium, finished both outside and inside in white epoxy powder coating for added protection and reflectivity.
An opal non-discolouring high-impact acrylic diffuser is used throughout the range. It offers excellent vandal resistance, is highly translucent and will not discolour even when subjected to the harshest UV environments.
Characteristics
General Information
Recommended installation height (m)
2.0 -
4.0
Compliance
Electrical information
Electrical class
Nominal voltage
Performance
Luminaire output flux (lm)
855 -
1868
Power consumption (W)
7.0 -
15.0
Luminaire efficacy - up to (lm/W)
127
Optical information
LED colour temperature
Colour rendering index (CRI)
≥80
Housing and finish
Housing
Marine grade high-pressure die-cast aluminium (EN 1706 AC-44300)
Finish
Black - RAL9017 textured finish (Standard)
Optional: other RAL colours available on request
Tightness level
Lifetime
All configurations
Operating conditions
Dimension and mounting
Dimensions and mounting
AxBxC (mm | inch)
280x280x104
Weight (kg | lbs)
Standard version: 2
Emergency version: 2.3
Mounting possibilities
Surface Mount